Common Problems That Can Hinder The Performance Of Your Shallow Well Pump

For people living in areas with a relatively higher water table, installing a shallow water pump can cater to a majority of their water consumption needs. As the name suggests, these pumps are used in wells that are not too deep, in fact they work best only with wells having a maximum depth of 20 feet. However, like most other machines, shallow water pumps also need regular repair and maintenance and in the absence of the same can develop performance issues. If your shallow water pump has not been performing as expected for some time now, you can check the below listed problems to know what is wrong and what is the best way to rectify the problem.

Reduction In Water Discharge

There are several reasons that might cause this problem but the most common ones are an air leak in the suction line or leak in the casing gasket. In both the cases, the problem can be resolved by closing the leak by either replacing the specific part or using a sealing compound over the affected area. However, in case the reduction is discharge is not caused by any leakage, then it is best to seek the help of a professional shallow water pumps technician.

Absence of Enough Pressure

This problem is generally caused by leakage in the foot valve or clogging of the suction screen. In case the foot valve is damaged, you should get it replaced by hiring an expert technician. However, in case the suction screen is clogged, then all you need to do is open it and clean it thoroughly. Also check for any holes and damages in the screen as in that case you might need to get it replaced.

Loss Of Suction

One of the most common complaints that people face with their shallow water pumps is that of loss of suction. This prevents the pump from pulling up the water and therefore causes a water shortage of sorts. The main causes of this problem include leakage in suction line and a clogged foot valve or strainer. In case of leakage, the suction line should be repaired or replaced as the need be, while in case the foot wall or strainer is clogged, cleaning them thoroughly will resolve the problem.

Excessive Noise And Vibration

If your pump makes excessive noise or vibrates too much, then it is an indication that something is not right with it. It might either have a damaged impeller or worn motor bearings, which need to be replaced to solve the problem. The excessive noise and vibration might also be caused by the presence of a foreign material in the pump, which then needs to be removed.